|
|
|
 |
Dock Equipment
Dock Lifts |
| Company | Description | Picture | ||||||||||||||||||||||
| Top of Ground Dock Lifts | ||||||||||||||||||||||||
| Advance Model 6100 |
Lifting Capacity: 5000 lbs. Platform Size: 6' x 8' Overall Size w/ ramp: 6' x 10½' Lowered Height: 5" Raised Height: 60" Approx Ship. Weight: 3300 lbs. |
 |
||||||||||||||||||||||
| Advance Model 6150 |
Lifting Capacity: 5000 lbs. Platform Size: 6' x 8' Overall Size w/ ramp: 7' x 11' Lowered Height: 6¼" Raised Height: 60¼" Approx Ship. Weight: 3400 lbs. |
 |
||||||||||||||||||||||
| Pit Mounted Dock Lifts | ||||||||||||||||||||||||
| Advance
5000 lb. capacity |
|
 |
||||||||||||||||||||||
| Advance
6000 lb. capacity |
|
 |
||||||||||||||||||||||
| Advance
6000 lb. capacity |
|
 |
||||||||||||||||||||||
| Advance
8000 lb. capacity |
|
 |
||||||||||||||||||||||
| Advance
Portable |
|
 |
||||||||||||||||||||||
Dock Levelers |
| Company | Description | Picture |
| Dock Levelers | ||
| Pioneer
P1000, P2000 |
55,000 lb. min. yield steel tread plate 3
year warranty on P2000 |
 |
| Pioneer
HP Series |
55,000 lb. min. yield steel tread plate 5 year warranty on all structural members and cylinders |
 |
| Autoquip | Travel up to 30" Capacities up to 60,000 lbs. |
 |
| Edge of Dock Levelers | ||
| Pioneer BL Series (Barlift) |
20,000 to 30,000 lb. capacities 2 year standard warranty 55,000 lb. Minimum yield safety treadplate deck 66", 72", 78" and 84" widths Available with or without bump blocks |
 |
| Pioneer ED Series |
 |
|
| Pioneer HED Series |
 |
|
Dock Boards |
| Company | Description | Picture |
| Dock Boards | ||
| Bluff Manufacturing, Inc. Aluminum Dockplate (A-B) |
Recommended for nonpowered
loading applications. Available in two capacity ranges. Low-cost solution to light activity applications. Bolt-on steel legs for securing position between the dock and the trailer. |
 |
| Bluff Manufacturing, Inc. Aluminum Dockboard (AC-BC) |
Capacities from 10,000 to 15,000
pounds. Full-length structural steel bolt-on curbs. |
 |
| Bluff Manufacturing, Inc. Door Track Protector
|
Chamfered edge reduces risk of
hand injury when lowering door. Wrap-around track design allows for free door operation. Projects 7" from wall. Anchors to both wall and floor. Safety yellow enamel over gray primer coat. |
 |
Dock Seals |
| Company | Description | Picture |
| Chalfant Series 100 |
These basic dock seals are designed to fit
most standard door sizes. Model 160 seals are normally stocked in black. |
 |
| Chalfant Series 101 & 103
|
The standard Series 101 dock seal features a fixed 24" head curtain for doors higher than 9 ft. A special design, Series 103, features an adjustable head curtain that can be raised or lowered by a "touch-and-hold" pulley arrangement. |
 |
| Chalfant Series 200 & 205 |
These special units are designed with an 18" steel backed head pad that can be raised or lowered to accommodate various size vehicles. |
 |
| Chalfant Series 300 |
These new units feature a unique design that provides the flexing action of a shelter and the tight fit of a dock seal while allowing full access to the rear of the trailer. |
 |
| Chalfant Series 500 |
Chalfant Rail Shelters provide excellent protection for material handling operations at docks where rail cars are loaded or unloaded. |
 |
| Chalfant Series 600 |
Collapsible Truck-A-Matic Dock Operates automatically. As a truck contacts the header curtain and completes its docking movement, it compresses the spring loaded frame. This causes vertical front curtains and bottom pads to swing inward to truck sides, completing the seal. |
 |
| Chalfant Series 700 |
Chalfant Series Truck Dock Shelters are designed for the truck to back into the shelter as if into a tunnel. As the truck backs inside, the side and top curtains flex inward with a wiping action that conforms to and completely seals the sides and top of the truck. |
 |
| Chalfant Recover Kits |
Your dock seal can be re-covered using your existing foam pads and basic structure. Chalfant can furnish new covers that can be easily installed over your old pads. |
 |
Loading Dock Accessories |
| Company | Description | Picture |
| TMI Laminated Bumpers
|
Laminated Bumpers are constructed of recycled truck tire pads compressed between steel angles and secured with ¾" steel tie rods. The laminated type protects both trucks and docks and are the most commonly used bumper. |
 |
| TMI Molded Dock Bumpers
|
Molded Dock Bumpers are manufactured using reinforced rubber in a variety of shapes and sizes. These solid, durable, one piece bumpers are smooth, attractive and won't harden or be affected by weather. The most popular models are the "T", "L", and "R" styles. |
|
| TMI Wheel Chocks
|
Wheel Chocks create a safer dock are and are often required in order to meet OSHA regulations. Available in 5 basic styles: laminated rubber, aluminum, urethane and two types of molded rubber. |
|
| Phoenix Loading Dock Lights |
Loading Dock Lights can provide illumination into opened truck trailers that are backed into shipping or receiving loading docks. They can also provide light in dimly lit high traffic areas where accidents can occur easily. |
|
|
||||
Copyright © 1996- |
Last Updated: 05/15/2003 | |||
